my next motorcycle :P

DIMENSIONS: Length: 102 inches Width: 27.7 inches Height: 36.9 inches Wheelbase: 76 inches Seat Height: 29 inches Weight: 1,500 lbs. Track, Front: 8.75 in Track, Rear: 10 in Weight Dist: 49F/51R Ground Clearance: 3 in Fuel: 3.25 gallons ELECTRICAL SYSTEM: Alternator: 136-amp high-speed Battery: Leak-resistant, maintenance-free 600 CCA Lighting: Headlights consist of 12 five-watt LEDs, front, with beam-modifying optics and masked lenses. Eight LEDs, rear. Headlamps articulate with wheels. TRANSMISSION: Manual, foot-shifted two-speed Aluminum-cased two-speed, sequential racing-style with dog ring, straight-cut gears Gear Ratios: 1st 18:38; 2nd 23:25 Clutch: Double-disc, dry-plate with organic friction materials, hand lever actuated with assist Final drive: Dual 110-link motorcycle-style chains Front Sprockets: 14 teeth Rear Sprockets: 35 teeth ENGINE * 500 bhp (372 kW) @ 5600 rpm (60.4 bhp/liter); 525 lb.-ft. (712 Nm) @ 4200 rpm * 10-cylinder 90-degree V-type, liquid-cooled, 505 cubic inches (8277 cc) * 356-T6 aluminum alloy block with cast-iron liners, aluminum alloy cylinder heads * Bore x Stroke: 4.03 inches x 3.96 inches (102.4 x 100.6) * Two pushrod-actuated overhead valves per cylinder with roller-type hydraulic lifters * Sequential, multi-port electronic fuel injection with individual runners * Compression Ratio: 9.6:1 * Max Engine Speed: 6000 rpm * Fuel Requirement: Unleaded premium, 93 octane (R+M/2) * Oil System: Dry Sump; takes 8 quarts Mobil1 10W30 Synthetic * Cooling System: Twin aluminum radiators mounted atop engine intake manifolds, force-fed from front-mounted, belt-driven turbine fan. Takes 11 quarts of antifreeze. * Exhaust System: Equal-length tubular stainless steel headers with dual collectors and central rear outlets BODY/CHASSIS: Longitudinal, centrally mounted engine, rear-wheel drive layout; monocoque construction, engine is central, stressed member. Body of billet aluminum. SUSPENSION: Front: Outboard, single-sided parallel upper and lower control arms made from polished billet aluminum. Mounted via ball joint to aluminum steering uprights and hubs. Five degrees caster. Single, fully adjustable centrally located coil-over damper (2.25-inch coil with adjustable spring perch); pullrod and rocker-actuated mono linkage. Center-lock racing-style hubs Rear: Hand-fabricated box-section steel inboard swing arms, incorporating "hydral-link" lockable recirculating hydraulic circuit parking stand. Single fully adjustable centrally located Koni coil-over damper (2.25-inch coil with adjustable spring perch); pushrod and rocker-actuated mono linkage. Center-lock racing-style hubs STEERING: Dual hub center type steering. Steering Linkage: Rocker arm and push/pull rod with roller bearings. Polished billet aluminum steering yoke with turned aluminum grips and billet levers Steering Lock: 20 degrees, left and right Lean Angle: 45 degrees, left and right TIRES and WHEELS (4): Type and Material: Billet aluminum discs, asymmetrical Size, Front (2): 20x4 Size, Rear (2): 20x5 Tires Mfr. and Model: Dunlop custom-made symmetrical Size, Front (2): P120/60R-20 Size, Rear (2): P150/50R-20 BRAKES: Front: 20-inch perimeter-mounted drilled machined stainless steel rotors, one per wheel. Two four-piston fixed aluminum calipers per wheel (16 pistons total), custom designed. Blue anodized caliper finish. Hand-activated. Rear: 20-inch perimeter-mounted drilled cast-iron rotors, one per wheel. One four-piston fixed aluminum caliper per wheel (8 pistons total), custom designed. Blue anodized caliper finish. Foot-activated. PERFORMANCE: 0-60 mph: 2.5 seconds (est.) Top Speed: 300+ mph (est.)

Lawn care business tips

Thats the Tomahawk Motorcycle Concept cost $225,000.00 if they made it.

I saw the picture on it yesterday but now it's gone! Great bike though.