Ferris Is 3000

[mschlotter]

I have a ferris IS 3000 zero turn with a few problems. 1. It seems weather the ground is wet or not, the mower still digs in whenever I turn (Yes, i tried going as slow as i could) Could the wheels be tilted or something? 2.The Clutch for the blades do not activate once the mower has been running. It will start if it has been cold. I have replaced the switch as that is not the issue. I have to pull switch up and go under the mower from the back and tap the pully with a hammer. 3. The right handlebar is "jumpy" I'm assuming this could be a valve? It is quite embarrassing when I am out at a lawn and I have to tap the pully, and I don't normally do a 0 point turn, I may do a 2-3 point turn just so I don't rip up the lawn, the down side is it takes longer and i need more room to do 3 point turn. I'm just hoping some of you guys had the same problems and know a solution, thanks.

---

Last edited by mschlotter; 09-06-2011 at 07:58 PM.

[wandfsmall]

Lawn care business tips

First off how many hours are on the unit, and how old is it? Originally Posted by mschlotter I have a ferris IS 3000 zero turn with a few problems. 1. It seems weather the ground is wet or not, the mower still digs in whenever I turn (Yes, i tried going as slow as i could) Could the wheels be tilted or something? It could be, but another solution would be worn shocks... Originally Posted by mschlotter 2.The Clutch for the blades do not activate once the mower has been running. It will start if it has been cold. I have replaced the switch as that is not the issue. I have to pull switch up and go under the mower from the back and tap the pully with a hammer. Sounds like an electric clutch. I do not see that crossed to a Warner(the company that made the clutch) number so I would expect to see it around $350 to $400 Originally Posted by mschlotter 3. The right handlebar is "jumpy" I'm assuming this could be a valve? My guess it a gas shock but it could also be a week hydro or the other hydro in bypass mode The shock would be the most common and cheapest so I would start looking at that.

__________________
I am the owner of www.AllOutdoorParts.com an online mower parts distributor. I am also a Briggs Master Service Technician and Expert Certified Mechanic for Kohler. If my posts helps you please like my facebook page at www.facebook.com/alloutdoorparts

[mschlotter]

It has about 800 hours on it.