Announcement

Collapse
No announcement yet.

Echoe speed feed trimmer head

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Echoe speed feed trimmer head

    Just curious how many people are using these and how they like them my local lawnmower shop can't keep them in because so many companies are buying them. Just wondering the pros and cons...

  • #2
    I use one and I think its awesome. Love it. I run it at half throttle a lot of the time. The speed feed is sweet too. Just run the line through the head and twist it. Easy. The 5 year guarantee is pretty nice too. Great machines.

    Comment


    • #3
      I have two of them ...I think they are pretty good so far...I like the power they have and you don't have to run them wide open all the time....

      Comment


      • #4
        i hate it, not the trimmer but the head, wont take much line i prefer the windup one.

        Comment


        • #5
          I also have an echo trimmer with the speed feed trimmer head. I am very pleased with it so far. Just on a side note, remember to use 89 octane or better for the trimmer, I have heard of others having the carburetors break because they were using 87 octane. It also states to use 89 octane or better in the operators manual.
          http://www.fentonslawncare.com

          Comment


          • #6
            I love the head but have seen problems with them on heavy use such as cemetery or road crews. For some reason under really heavy use they do not seem to hold up as well as I would like to see.
            I am the owner of www.AllOutdoorParts.com an online mower parts distributor. I am also a Briggs Master Service Technician and Expert Certified Mechanic for Kohler. If my posts helps you please like my facebook page at www.facebook.com/alloutdoorparts

            Comment


            • #7
              I think im gonna pick a few up ive talked with several people and they all say they are great..

              Comment


              • #8
                I am using the speed feed this year, you cant beat the quickness to reload the line, mine is the high capacity model, I loaded 25 feet of line into it yesterday. Took a minute to load it. You feed the line through the head, make sure you have equal lengths then turn the head and in a minute its loaded. Before I would watch my guy take at least 5 minutes with the old head. Time is money, and with the extra room, they don't run out as often. Also to note, if by chance the line breaks off inside the head, its very easy to remove the top to clear the line.
                http://www.lunchesruslawncare.com

                Comment


                • #9
                  Glad there is a post on this! Ok so I went to buy two new trimmers today and all they carry now are these speed feed your talking about. I like to have all the same stuff and my current trimmer is the older trimmer head . I didn't take the time to learn the new head cuz I was just going to go online and find the older style....can someone give me a run down of how these new ones work!!? From the looks of it though they looked pretty chinsy and a hassle! Thanks in advance.

                  Comment


                  • #10
                    Super easy. Just line up the holes. Inside holes and out side. Cut about 10 feet of line or more if you have larger capacity spool. The just hold on to the bottom of spool and crank the top part. If you have trouble aligning the holes for the line you can pop off the bottom of the head really easy.

                    Comment


                    • #11
                      bad *** trimmer




                      ****ty head

                      Comment


                      • #12
                        I dont have a problem with the head. Has held up well for me.

                        Comment


                        • #13
                          I heard that they work pretty good. It's worth a try.

                          Comment


                          • #14
                            i hate it, not the trimmer but the head, wont take much line i prefer the windup one.
                            Love it....the engine has been experiencing over-heating...not surprising since it has been humid and hot the past couple months...otherwise I like the speed head...cargo shorts are great for an extra spool of whip
                            08 F250 Ext Cab/04 Chevy 3500
                            05 F350/04 F350 Diesel/12 Ram 4500 Dump
                            4 -60 Toro Zmaster/Lesco 48
                            3 -8'2" Boss V-Plows
                            1- Hiniker 9'6" V-Plow
                            20' Enclosed trailer
                            18' Skid & 16' Open Trailer
                            2012 - S185 Bobcat


                            Comment


                            • #15
                              I just got one and used it for the 3rd time. Love it so far. I've used the brand many times before, but the speed feed is insane. It doesn't take long to reload at all.

                              Comment

                              Working...
                              X