If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I would check for loose or bad connections. Like a loose battery cable, corroded battery cable, loose connection on a battery cable (the terminal being loose on the cable), etc. There is a possibility the starter needs rebuilt (removed, cleaned, re-lubed, and reinstalled. Rebuilding the starter is NOT something I would recommend to someone who has no experience with small engine starters. The starters on most small engines are sorta delicate and most, if not all, require special tools and training to do it properly.
Again, start with looking at battery/cable connections for being loose or corroded.
One of a dying breed; the servicing dealer. A Servicing Dealer services what they sell and are factory certified to make these repairs. Find & support them.