If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
there is hundreds of tool box designs ,and your picture doesnt show much detail ,anyways,does it have a plate riveted to the box at the latches ? if so drill out the rivets and get in that way .Does it just have a lock installed in a circuler hole ? drill the lock .Does it have a riveted hinge ,if so drill the rivets .If your box is plastic,sometimes you can remove the box from the truck,and flex the box by standing it on one corner and pushing down real hard .