Announcement

Collapse
No announcement yet.

55 Gallon water tank

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 55 Gallon water tank

    Does anyone know how to make a water tank out of 55gallon plastic. I want to make one so when I am out I can have a water source to water plant beds.
    I know I need a small water pump and a garden hose. Any ideas on this and do you think it will work?

    Thanks Leon
    Can You Envision the Possibilities... We Can!
    www.Envisionlawn.com
    1-888-412-LAWN

  • #2
    You can probably create one using an air compressor or... bike pump...

    It would be a pretty complex tool to use, but I like the idea of building one.


    I have tried to siphon gasoline from my equipment using plastic wrap, tape, and a straw along with a bike pump. I could not get enough pressure inside the gas tanks to make it actually work. My seal wasn't too great.

    If you have a perfect seal, it is possible, but it will take forever if pumping, if it doesn't work you could cause an explosion lol.

    You would need most likely 50% air and 50% water, or more air than water inside of the barrel/drum or container...

    You would also need an exit point for the water, it could be the same area the air is entering the barrel/drum/container, but this would be primitive and time consuming. There is no fail-safe and you could end up wasting your time. I'd have to try, but I have a feeling you would have to continuously provide air pressure while using the 'tool', once the pressure inside the 'barrel' drops it would most likely become useless.

    I'm going to draw up a picture, because this is awesome.
    Last edited by CHEESE2009; 01-23-2012, 05:52 AM.

    Comment


    • #3
      find someone selling "pony pumps " they have a 12 volt model that screws to a garden hose on each end ,these pumps are good quality ,around $100.00 ,small ,and will work fine for your use .You will need to have a vent in your barrel but other than that this is an easy project .

      Comment


      • #4
        there is a DIY video on YouTube. I remember looking into this project but i never got around to it lol

        Comment


        • #5
          There are a bunch of videos on youtube for instance.

          <iframe width="420" height="315" src="http://www.youtube.com/embed/Oag42LhgMoE" frameborder="0" allowfullscreen></iframe>
          - Subscribe to my Lawn Care Marketing Blog Feed and get daily tips sent to you. Free!
          Download your Free trial of Gopher Lawn Care Software.

          Comment


          • #6
            water pump

            Thanks I found this on youtube, Seem perfect


            <iframe width="420" height="315" src="http://www.youtube.com/embed/iRNnh-4O63I" frameborder="0" allowfullscreen></iframe>
            Can You Envision the Possibilities... We Can!
            www.Envisionlawn.com
            1-888-412-LAWN

            Comment


            • #7
              Take some pictures and show us what you ultimately create.
              - Subscribe to my Lawn Care Marketing Blog Feed and get daily tips sent to you. Free!
              Download your Free trial of Gopher Lawn Care Software.

              Comment


              • #8
                demo

                I did this a few day ago I am going to hook up a stronger pump and a power source I can control from the inside of the truck, or maybe on the truck bed.

                <iframe width="420" height="315" src="http://www.youtube.com/embed/a5_cg0-jd9Q" frameborder="0" allowfullscreen></iframe>
                Can You Envision the Possibilities... We Can!
                www.Envisionlawn.com
                1-888-412-LAWN

                Comment


                • #9
                  try putting your water pump on the ground ,I think your pump is unable to draw the water up to the height of your truck easy enough .Also ,with almost every type of water pump ,you should never run it without it being full of water as the seals require the water to lubricate and cool themselves ,wich will result in leaks .

                  Comment


                  • #10
                    Yes I am going to mount the pump lower to improve water flow. This was just a test run, I think the pump did good even at that height it worked. Over the next few week I am going to paint the barrel an logo it up I am going to try to make it customer attractive. If I can come up with a self contained unit I could sell it to the customer that does not have a easy water source. Only cost me under $60. I am going to offer compost tea to my customer this year. 95% profit margin

                    Leon

                    Envision Lawn & Landscape
                    Can You Envision the Possibilities...We Can!
                    Can You Envision the Possibilities... We Can!
                    www.Envisionlawn.com
                    1-888-412-LAWN

                    Comment


                    • #11
                      Nice job on that setup!
                      http://www.lunchesruslawncare.com

                      Comment


                      • #12
                        I am going to offer compost tea to my customer this year. 95% profit margin
                        That's genius! Keep us posted on how all that goes!
                        - Subscribe to my Lawn Care Marketing Blog Feed and get daily tips sent to you. Free!
                        Download your Free trial of Gopher Lawn Care Software.

                        Comment

                        Working...
                        X