Enclosed Trailer Racks/Holders

[picframer]

Some time ago a member posted pictures of racks they had inside their enclosed trailer that were really nice, I can't seem to find the thread. What I am looking for is a rack to hold mixing oil, WD40 etc and I recall the rack in the post would be perfect.

Also I am about to order a trimmer rack as the final thing I need, I would prefer one that locks easily.

Also I am cusious abot tools, do you guys carry a tool box with each setup in the event that something brakes?

Appreciate your feedback.

andy

[Mike's LawnCare Landscape]

Some time ago a member posted pictures of racks they had inside their enclosed trailer that were really nice, I can't seem to find the thread. What I am looking for is a rack to hold mixing oil, WD40 etc and I recall the rack in the post would be perfect.

Also I am about to order a trimmer rack as the final thing I need, I would prefer one that locks easily.

Also I am cusious abot tools, do you guys carry a tool box with each setup in the event that something brakes?

Appreciate your feedback.

andy

I have a pic of some racks like that !! I will have to find them .
I carry a tool box on my Trailer all the time.

[Mike's LawnCare Landscape]

<a href="http://s45.photobucket.com/albums/f70/Hyderyoda/?action=view&current=P1010281.jpg" target="_blank"><img src="http://i45.photobucket.com/albums/f70/Hyderyoda/P1010281.jpg" border="0" alt="Photobucket"></a>
<a href="http://s45.photobucket.com/albums/f70/Hyderyoda/?action=view&current=P1010282.jpg" target="_blank"><img src="http://i45.photobucket.com/albums/f70/Hyderyoda/P1010282.jpg" border="0" alt="Photobucket"></a>

There from Lowes and there cheap
The chain saws are sitting in a watter hoes rack with a small L bracket with the end bent up after it was in place.

[picframer]

Mike, That is the rack I was think of, the one with your ear protection and oil, I looked online and the big box stores but didn't find anything, may i ask where you found that one? Many Thanks!

[Mike's LawnCare Landscape]

Mike, That is the rack I was think of, the one with your ear protection and oil, I looked online and the big box stores but didn't find anything, may i ask where you found that one? Many Thanks!

I got that from lowes . I think the name was closet maid .
It has parts to it . You buy the 2 up Things then you can get as many selves that you need . I think the price for what I have with the oil and every thing on it ran me around $25 and the rack that's one piece was around $12( the one that has coffee can on top)and my back pack blower hook is only $2 .

[Steve]

That is great! It's hard for me to see but what is holding up the back pack sprayers?

[picframer]

I got that from lowes . I think the name was closet maid .
It has parts to it . You buy the 2 up Things then you can get as many selves that you need . I think the price for what I have with the oil and every thing on it ran me around $25 and the rack that's one piece was around $12( the one that has coffee can on top)and my back pack blower hook is only $2 .

Cheap, Great looking and Functional, just what I need Thanks a bunch, We do not have a Lowes here however Home Depot, Rona or Kent must have these, really appreciate the info. Luve the Chainsaw holders, would have never thought of that.

[picframer]

Mike, Do you strap your gas can's down? I was thinking of buying some flat steel and just bending in and making a latch to hold them firm.

How do you mark your cans or are you always with the equipment? Some of my gear is diesel, some two strokes and some four, last thing I want is an employee putting the wrong gas in. I thought of placing luggage tags on the cans and use a numbering system that matched the piece of equipment, I bought those Flo & Go nozzles as i find them really slick and although I know the yellow cans are diesel I am concerned a little an employee would take the wrong one.

I thought I should probably put a tool box together for each unit.

When you are at a job site and you take the equipment out that you are going to use, do you lock your trailer back up? I was doing a deck a few years ago in a very good area of the city, we stopped for lunch and went around to the front of the home to eat, 1/2 hour later we went to go back to work around back and most of our tools were gone, I was shocked as we didn't hear or see a thing and were only, maybe 50 feet away so someone was watching.

andy

[justin_time]

Mike, Do you strap your gas can's down? I was thinking of buying some flat steel and just bending in and making a latch to hold them firm.

How do you mark your cans or are you always with the equipment? Some of my gear is diesel, some two strokes and some four, last thing I want is an employee putting the wrong gas in. I thought of placing luggage tags on the cans and use a numbering system that matched the piece of equipment, I bought those Flo & Go nozzles as i find them really slick and although I know the yellow cans are diesel I am concerned a little an employee would take the wrong one.

I thought I should probably put a tool box together for each unit.

When you are at a job site and you take the equipment out that you are going to use, do you lock your trailer back up? I was doing a deck a few years ago in a very good area of the city, we stopped for lunch and went around to the front of the home to eat, 1/2 hour later we went to go back to work around back and most of our tools were gone, I was shocked as we didn't hear or see a thing and were only, maybe 50 feet away so someone was watching.

andy

I use this gas can

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200325161_200325161

Works pretty good for me, going on second season and no complaints so far.



Also if you looking for racks, i'm ordering these in the spring

http://www.trailerracks.com

[Mike's LawnCare Landscape]

Mike, Do you strap your gas can's down? I was thinking of buying some flat steel and just bending in and making a latch to hold them firm.

How do you mark your cans or are you always with the equipment? Some of my gear is diesel, some two strokes and some four, last thing I want is an employee putting the wrong gas in. I thought of placing luggage tags on the cans and use a numbering system that matched the piece of equipment, I bought those Flo & Go nozzles as i find them really slick and although I know the yellow cans are diesel I am concerned a little an employee would take the wrong one.

I thought I should probably put a tool box together for each unit.

When you are at a job site and you take the equipment out that you are going to use, do you lock your trailer back up? I was doing a deck a few years ago in a very good area of the city, we stopped for lunch and went around to the front of the home to eat, 1/2 hour later we went to go back to work around back and most of our tools were gone, I was shocked as we didn't hear or see a thing and were only, maybe 50 feet away so someone was watching.

andy

I don't tie down the can. I also have never had one jump out or tip over from the little box. I have a can that's has faded over time and that's the one that I used mixed in.

Steve ~~~~(That is great! It's hard for me to see but what is holding up the back pack sprayers?)

Its a bicycle rack that I tried for a line trimmer rack but it bounced all over and you had to tie the trimmer to it every time .
But it worked reak good for the sprayer with a extra hook to hold the top back .
PS I know I need to tie down my gas cans!!!!!

[Mike's LawnCare Landscape]

[majoe7]

Mike,

Thanks for all the pics. They are great and show a lot. I love the one with the rack holder. I thought of the same idea with the wood, but now seeing it, I just stole your idea. Thanks.

I also like the fact that you use what ever it takes to store or hold things, ie: bungee cord, old coffee holder, but I think that you are missing a fly swatter. LOL. Employee thief, some ones getting fired.

Thanks again.

[skeltor]

I made a rake/shovel rack out of 2 3/8" fence post and light weight square tubing and just bolted it to the trailer it works great. Whats the trick to uploading pics. Mine won't I'm sure it's me.

[Steve]

Whats the trick to uploading pics. Mine won't I'm sure it's me.

Are you clicking on the manage attachments button below when you make a post?

When you select the files in the next window are you also clicking the upload button to the right when you are done?

Or is it giving you an error because the files are large?

If you still cant get them up, email me them and I will post them for you.

[Steve]

Here is the rack picture I was emailed.