If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well the pic is a digital image of the drawing that I had done. Itís basically a 4'x4' piece of aluminum. Itís screwed in with about a dozen self tappers. As far as the rest I gave the guy I piece of paper with all the things I wanted on it and he took care of the rest. It only cost me $175
I like your thought behind the sign, but Justin is right, it is to busy. People driving down the road will be too distracted with the clutter i think to get the number down. It's hard enough to get a # while driving as it is. Just my thought, good luck.
yes its vinyl with a uv coating. I would very much like to the same thing on my truck but I havn't come up with the design for it all yet.
Here is an idea. Maybe for the door, have your picture with the close cuts written in it, then have landscaping underneath with your phone number along the rear fender above the wheel well and then maybe your website on the front fender?
Hey guy's want to thank you all for your input. Some of it was positive and some negative. I know that some of you said it was to busy and I can see what you mean but you also have to understand that it is a sign on the back of the trailer. The people who are going to see the sign are going to be directly behind me. Anyone far away or to the sides won't see it and thats fine with me. Thats why i'm getting ready to get some stuff done on my truck to and I plan on keeping that simple. I will keep you all posted on when I do. Thanks for all the info.