PDA

View Full Version : 26 HP Briggs \ Scag


zak
05-14-2009, 12:09 PM
looking at a scag tiger cub 48'' deck with 26hp briggs motor , any advise on this before i buy.

Steve
05-14-2009, 01:41 PM
How many hours on it? What kind of price are they looking for?

zak
05-14-2009, 04:44 PM
new 6300,00 .

SuperiorPower
05-14-2009, 06:28 PM
Scag is a good mower. Do you know if it is a Briggs Vanguard or Briggs Intek engine? The vanguards are much better quality. If yoiu have options for Honda, Kawasaki, or Kohler, I would definitely check them out. Kawasaki probably being the preferential.

BTW, where are you located?

zak
05-14-2009, 07:54 PM
spec.'s (STC48V-26BS** *** 48" Velocity Plus™ Cutter Deck, 26hp Briggs & Stratton ELS air-cooled engine )

zak
05-14-2009, 09:53 PM
okay let me ask a diffrent way.
> New Scag 48'' cut with 26hp briggs 6300.00
> Used Toro 48'' cut with 19hpkawasaki 140hrs. 4500.00
> Used Toro 52'' cut with 27kohler 650hrs. 4500.00

SuperiorPower
05-14-2009, 10:10 PM
okay let me ask a diffrent way.
> New Scag 48'' cut with 26hp briggs 6300.00
> Used Toro 48'' cut with 19hpkawasaki 140hrs. 4500.00
> Used Toro 52'' cut with 27kohler 650hrs. 4500.00

if money is not an object, I would go in that exact order. The 52" is over priced in my opinion. Sure, it has a much bigger motor, but has a lot of hours. Sure it should last another several years, but not as long as the Kawasaki. The Scag for less than $2000 more is, in my opinion, the best deal. Have you checked to see if the Scag price is the lowest they will go? The problem I have with the 48" Toro is the small motor relative to the deck when compared to the others. But a Kawasaki is a heck of a motor.

Good luck,
Eli

musician/lawnman
05-15-2009, 08:09 AM
Eli,
I have 2 machines, A 52" Yazoo kees with a 23hp kohler
& a 48" wright sentar sport with a 19hp Kaw.

The sentar is actually faster! both ground speed & blade tip speed.
I know that kawasaki makes a great engine but I think it may aslo have a good deal to do with how the mower is set up, pully sizes essentially can change the "gearing" & thus effect rpms at the spindles.

Speaking of which, Eli, do you have a book of some kind (like a blue book) for used mower values? Could you let me know what the Yazoo is worth? as I am contemplating putting it up for sale. Bought new in 07' now has about 800hours on it, No rips, tears, dents, etc. Normal wear, paint scratches etc. I addded the mulch kit, I still have the discharge shute & ROPS though I removed them just after purchase. I have maintained this thing religiously & have always changed oil every 50 hours running mobil 1 full synthetics in it.
Rear tires are about at the 1/2 worn point, fronts are new & I upgraded to solid rubber front tires to avoid all the tire plugs I was having to put in the old ones. Runs great & I am still using this machine to make money everyday.

Thanks man! Sorry to be so long winded.
Here's a couple pics of my 2 machines.

musician/lawnman
05-20-2009, 07:34 AM
Eli,
I think this one slipped through the cracks. I was hoping you might be able to give me some insite about the value of this machine?
Thanks man!

SuperiorPower
05-20-2009, 07:50 AM
Eli,
I think this one slipped through the cracks. I was hoping you might be able to give me some insite about the value of this machine?
Thanks man!

Chuck,

Sorry man. yes I did forget. At the moment I do not have a blue book. I have considered buying one but have not done so yet. They cost only about $70-$80!!!! How soon are you looking to sell? I may be able to find someone else that has one (not sure).

Again, Sorry for not getting back to you sooner,
Eli

bradsnipes
10-19-2011, 08:45 PM
Scag man all the way.