PDA

View Full Version : One blade cutting lower


hurtadolawncare
07-25-2008, 07:11 PM
I have a z425 48 in john deere mower ,and the middle blade is cutting lower than the two side ones. I took the spindle off and check the barrings they seem to be ok, any suggetions be appreciated

justin_time
07-25-2008, 07:26 PM
I have a z425 48 in john deere mower ,and the middle blade is cutting lower than the two side ones. I took the spindle off and check the barrings they seem to be ok, any suggetions be appreciated

Take off the blade.. I think your blade is twisted.

It happens alot to me. I hit rocks and they tend to twist.

What I usually do is put the 2 blades together and you can tell if it's twisted/bent

Steve
07-26-2008, 10:49 AM
Hurtado,

Let us know how you make out with this.

quickcleanlawn
07-26-2008, 12:15 PM
also checkthe deck where the spindle mounts it could also be twisted or bent.
be sure to look verey closely, it does'nt take much.