PDA

View Full Version : Logo Challenge


realhuntin
01-06-2008, 01:35 PM
Heres the deal

I have no Logo to speek of.

I don't have a clue on this part because when it calls for artist and I'm no arrtist at all when it comes to graphic.

I know what I don't want and that is the typical.

Here is some help in what I'm looking for;
something that combines Landscape and Hardscape
I don't want to change my fonts or the color of the fonts

I don't want to copy hardscaperpro's but I do like that logo from all others I have seen.

We are not the typical LCO so I don't want a typical Logo

it must stand out from all others

I have searched over +20k logos and nothing has come close to what I want mind.

Even if it is transfering a picture into a graphic then that may work.

It also must be able to use this on all paperwork, uniforms, trucks and on the website; for the webite it must have blended edges.

Can anyone fill this order?

If so, rule 1 is that it can not be used for any other LCO, I will handle the trade mark registery and it will become the sole TM and property of R & R Lawn Care. The TM must be placed on the logo in the approate place.

ARE YOU UP FOR THE CHALLENGE?

I also need this ASAP, my current Graphics person can only do generic logo's and this is not going to work for me.

Thank you Good Luck with this.
Tim

pmblair
01-06-2008, 02:32 PM
When you say "blended edges", what exactly are you talking about?

realhuntin
01-06-2008, 04:29 PM
It would look like this picture around the edges for website banner use only and others would be clean cut to the edge.

realhuntin
01-06-2008, 04:32 PM
Quote[/b] (pmblair @ Jan. 06 2008,2:32)]When you say "blended edges", what exactly are you talking about?
Thanks for repling fast Patrick. I guess the right term would be soft edged..

realhuntin
01-06-2008, 10:26 PM
So many people looking but no comments, questions or replies?

landonkade
01-06-2008, 10:57 PM
Quote[/b] (realhuntin @ Jan. 06 2008,1:35)]Heres the deal

I have no Logo to speek of.

I don't have a clue on this part because when it calls for artist and I'm no arrtist at all when it comes to graphic.

I know what I don't want and that is the typical.

Here is some help in what I'm looking for;
something that combines Landscape and Hardscape
I don't want to change my fonts or the color of the fonts

I don't want to copy hardscaperpro's but I do like that logo from all others I have seen.

We are not the typical LCO so I don't want a typical Logo

it must stand out from all others

I have searched over +20k logos and nothing has come close to what I want mind.

Even if it is transfering a picture into a graphic then that may work.

It also must be able to use this on all paperwork, uniforms, trucks and on the website; for the webite it must have blended edges.

Can anyone fill this order?

If so, rule 1 is that it can not be used for any other LCO, I will handle the trade mark registery and it will become the sole TM and property of R & R Lawn Care. The TM must be placed on the logo in the approate place.

ARE YOU UP FOR THE CHALLENGE?

I also need this ASAP, my current Graphics person can only do generic logo's and this is not going to work for me.

Thank you Good Luck with this.
Tim
you are thinking the same way i am Tim,lol. Thats whats taking me so long about getting a logo.

Anyone want to help me out to?

pmblair
01-07-2008, 12:50 AM
Tell you what, fellas..... both of you email me... = )

pmblair@blairprod.com

landonkade
01-07-2008, 01:52 AM
Quote[/b] (pmblair @ Jan. 07 2008,12:50)]Tell you what, fellas..... both of you email me... = )

pmblair@blairprod.com
e-mail sent

realhuntin
01-08-2008, 11:38 PM
Time is running out, I need this soon.
Come on Graphic guys show me *what you got to help me out with this.

Please and Thank you
Tim

realhuntin
01-10-2008, 08:33 PM
I need this soon Graphic Guys. Show me how creative you can be.

Thanks Tim

ABurlison
01-10-2008, 08:38 PM
No rough copies yet or anything? *I'm sure someone can come up with something. Maybe they Respect you so much, they want to make sure they have something absolutely perfect?

realhuntin
01-13-2008, 11:32 AM
7- days this post has been out for a request to help with logo and NO ONE can come up with anything? Whats up with this.

This would be a good account for someone or dosn't anyone want my business?

Only 24 hours left for someone to reply to the challenge and then I'm going to have to find someone locally to do it.

This account will have need for:

3 Trucks- 2-Chev 2500 4x4 ext. cabs and HD #3500 Dump
1 Cat 247B skid steer
1 Mini Skid (prowler) w/rigged out trailer.
1 gator
2 landscape trailers
1 dump trailer

This may not be a very big account for some but to me this is alot. I want flames on the skid steers along the front dog house and arms with logo's on 3 sides same for the gator.

Trucks should have logos both doors and website on back window, less the dump and it would need "stay back 500 ft" on the tailgate

Trailers need 3 sides and back with "stay back 500 ft".

Looking for something that incorperates Hardscapes, Landscapes, and Grounds Maintenacne

With my slogan "We have your lawn care landscape needs covered"

Thank you
Tim

Below is a picture of a CAT 247B

Steve
01-13-2008, 05:24 PM
I sent a message to Tony.

I hope he can jump in and help http://www.gophergraphics.com/forum/iB_html/non-cgi/emoticons/smile.gif

realhuntin
01-14-2008, 12:52 AM
Thanks Steve

AMW Graphics
01-15-2008, 06:41 PM
Quote[/b] (Team Gopher @ Jan. 13 2008,5:24)]I sent a message to Tony.

I hope he can jump in and help http://www.gophergraphics.com/forum/iB_html/non-cgi/emoticons/smile.gif
Steve, I dont think i ever got it...unless it got deleted acidently when deleting all the "spam" PM's.

Sorry.

justin_time
01-15-2008, 10:59 PM
http://i17.tinypic.com/85w3bqr.gif

Andrew's Lawn Care
01-16-2008, 12:26 AM
WOW what was used to create that?

justin_time
01-16-2008, 12:55 AM
Quote[/b] (Andrew's Lawn Care @ Jan. 16 2008,12:26)]WOW what was used to create that?
Photoshop

realhuntin
01-16-2008, 12:57 AM
Quote[/b] (justin_time @ Jan. 15 2008,10:59)]http://i17.tinypic.com/85w3bqr.gif
Thanks Justin nice work.

Not what I'm looking for good start though.

I appreciate the effort

Tim

realhuntin
01-16-2008, 01:00 AM
Quote[/b] (AMW Graphics @ Jan. 15 2008,6:41)]Quote[/b] (Team Gopher @ Jan. 13 2008,5:24)]I sent a message to Tony.

I hope he can jump in and help http://www.gophergraphics.com/forum/iB_html/non-cgi/emoticons/smile.gif
Steve, I dont think i ever got it...unless it got deleted acidently when deleting all the "spam" PM's.

Sorry.
Hi Tony,

Thank you and I will send you a email in detail of what I'm looking for in a design to help get started and list of graphics I will be needing.

Thank you

Steve
01-16-2008, 01:00 AM
Nice work Justin!

justin_time
01-16-2008, 01:01 AM
Quote[/b] (Team Gopher @ Jan. 16 2008,1:00)]Nice work Justin!
Thanks

I hope Tim checks it out

realhuntin
01-16-2008, 01:26 AM
Quote[/b] (justin_time @ Jan. 16 2008,1:01)]Quote[/b] (Team Gopher @ Jan. 16 2008,1:00)]Nice work Justin!
Thanks

I hope Tim checks it out
Thanks Justin, I did and left a reply to it in a previous post.

Good work!

ABurlison
01-28-2008, 01:09 AM
Tim, did you ever find someone to make you a logo and if so can we see? I've been considering a fresh design myself, but I really want something cutting edge, like the ones here:http://www.landscapermarketing.com/sample_logos.htm

Can anyone on here make something like this for an affordable price?

ABurlison
01-28-2008, 08:45 AM
OH

ABurlison
01-28-2008, 08:22 PM
Well, looks like I'm having the same problem Tim had, LOL!

Steve
01-29-2008, 12:01 AM
Maybe write to pmblair or write to Tony at amw-graphics.com?

caseyshields
01-30-2008, 12:28 AM
Hey Tim,

I'm a little late to this party. *But here is something different.

ritchiem
01-30-2008, 12:34 AM
I think I have a fantastic idea Tim don't do anything until I post again. Give me 1 day from now...I've drawn it...now I have to put it to graphics.

ABurlison
01-30-2008, 12:46 AM
Well, if I like what you make for Tim, I just might be on this as well, been looking for something new.

caseyshields
01-30-2008, 01:02 AM
Quote[/b] (ABurlison @ Jan. 30 2008,12:46)]Well, if I like what you make for Tim, I just might be on this as well, been looking for something new.
Andy,

Here's one:

ABurlison
01-30-2008, 01:14 AM
Good try bud, but not quite what I was looking for. Looks like I just might be contacting the $500 logo place.

caseyshields
01-30-2008, 01:19 AM
Andy,
Give me an idea of what you are looking for in a logo.

ritchiem
01-30-2008, 11:03 AM
kk this one is for Andy

http://thelawnblog.com/gopher/newcity_logo3.gif

same but different

http://thelawnblog.com/gopher/newcity_logo4.gif

caseyshields
01-30-2008, 11:51 AM
For Andy:

ABurlison
01-30-2008, 09:09 PM
Well I think your both on the right track, I'm starting like Ritchie's idea, but I'd love to see some more ideas.

THANKS